In accordance with §11 PAngV (German ordinance regulating the indication of Prices), the last offer price shows the lowest price of the last 30 days after all usual direct discount deductions. Discounts such as cashback or trade-in, which are calculated or paid out after the purchase or by third parties without a contractual relationship with Hifi Foto Koch GmbH (service providers, agencies, manufacturers, etc.) or which require further action, are not included.
The Beholder MS-PRO has been specially developed for professional filmmakers who are looking for a hand-held stabilizer that can be used with various types of small cameras weighing up to 860 grams. The Beholder MS-PRO is lightweight, easy to use and can be carried in the camera bag. The MS-PRO is extremely versatile and can also be used with a GoPro camera or smartphone.
360° motors
The 3-axis gimbal is equipped with three brushless motors that can rotate 360 degrees, giving the user limitless freedom of movement.
Designed for mirrorless cameras
With a payload of up to 900 grams, the MS-PRO is capable of stabilizing a wide range of today's popular mirrorless cameras such as Sony A6300, Sony A7SII, Panasonic GH5 and even cameras the size of a GoPro or a smartphone.
Advanced stabilization technology
With the combination of 32-bit controller and 12-bit encoder, the MS-PRO generates an adaptive PID algorithm to reliably stabilize the handheld camera. With this technology, the gimbal reacts faster, compensates for movements more easily and achieves a longer battery life.
Lock mode
In lock mode, the vertical, pitch and roll axes work together to point the camera in one direction. The camera position remains the same no matter how the handle is moved.
Point-Lock mode
Hold the camera in the desired position by manually pointing it and holding it in any direction. After a few seconds, the camera will lock until it is reset.
Inverted mode
Switch to inverted mode at any time by simply pulling the handle over the camera. This mode can be used in conjunction with one of the Lock and Follow modes.
Follow modes
The MS-PRO has three different modes. In yaw-axis follow mode, the MS-PRO only follows your panning movements. In pitch and yaw axis following mode, the MS-PRO follows the pan and tilt movements. Finally, the 3-axis follow mode offers full control, allowing you to pan, tilt and roll.
OLED status display
A display on the back of the handle conveniently informs you about the battery life and operating mode.
Easy balancing
With a newly developed quick-change base plate system, the MS-PRO can be easily balanced without tools.
Multiple mounting options
The MS-PRO handle is equipped with two 1/4-20 mounts that are perfect for mounting accessories such as lights, microphones or monitors. The 3/8-16 thread on the bottom of the handle allows you to securely mount the MS-PRO to a tripod, boom or dual handle mount such as the Ikan DGH.
Ikan Dual Handle (DGH)
Guiding the DS1, MS1 or EC1 Beholder Gimbal is child's play with the Ikan DGH handle. The handle is made of robust, lightweight aluminum. The sturdy frame of the DGH has been specially designed to simplify the handling of the gimbals.
Two comfortable, padded handles allow gimbal control with the upper body instead of just the wrist and reduce arm fatigue. The additional weight increases stability. Depending on the shooting situation, the gimbal can either be controlled with both hands or suspended with one hand.
The integrated foot rails allow you to put down the handle and calibrate the gimbal with both hands or put it down when not in use. Although the DGH is specifically designed for the Ikan DS1, MS1 + EC1, most gimbals with ¼"-20 connection from other manufacturers can also be used with the DGH.
The Beholder MS-PRO has been specially developed for professional filmmakers who are looking for a hand-held stabilizer that can be used with various types of small cameras weighing up to 860 grams. The Beholder MS-PRO is lightweight, easy to use and can be carried in the camera bag. The MS-PRO is extremely versatile and can also be used with a GoPro camera or smartphone.
360° motors
The 3-axis gimbal is equipped with three brushless motors that can rotate 360 degrees, giving the user limitless freedom of movement.
Designed for mirrorless cameras
With a payload of up to 900 grams, the MS-PRO is capable of stabilizing a wide range of today's popular mirrorless cameras such as Sony A6300, Sony A7SII, Panasonic GH5 and even cameras the size of a GoPro or a smartphone.
Advanced stabilization technology
With the combination of 32-bit controller and 12-bit encoder, the MS-PRO generates an adaptive PID algorithm to reliably stabilize the handheld camera. With this technology, the gimbal reacts faster, compensates for movements more easily and achieves a longer battery life.
Lock mode
In lock mode, the vertical, pitch and roll axes work together to point the camera in one direction. The camera position remains the same no matter how the handle is moved.
Point-Lock mode
Hold the camera in the desired position by manually pointing it and holding it in any direction. After a few seconds, the camera will lock until it is reset.
Inverted mode
Switch to inverted mode at any time by simply pulling the handle over the camera. This mode can be used in conjunction with one of the Lock and Follow modes.
Follow modes
The MS-PRO has three different modes. In yaw-axis follow mode, the MS-PRO only follows your panning movements. In pitch and yaw axis following mode, the MS-PRO follows the pan and tilt movements. Finally, the 3-axis follow mode offers full control, allowing you to pan, tilt and roll.
OLED status display
A display on the back of the handle conveniently informs you about the battery life and operating mode.
Easy balancing
With a newly developed quick-change base plate system, the MS-PRO can be easily balanced without tools.
Multiple mounting options
The MS-PRO handle is equipped with two 1/4-20 mounts that are perfect for mounting accessories such as lights, microphones or monitors. The 3/8-16 thread on the bottom of the handle allows you to securely mount the MS-PRO to a tripod, boom or dual handle mount such as the Ikan DGH.
Ikan Dual Handle (DGH)
Guiding the DS1, MS1 or EC1 Beholder Gimbal is child's play with the Ikan DGH handle. The handle is made of robust, lightweight aluminum. The sturdy frame of the DGH has been specially designed to simplify the handling of the gimbals.
Two comfortable, padded handles allow gimbal control with the upper body instead of just the wrist and reduce arm fatigue. The additional weight increases stability. Depending on the shooting situation, the gimbal can either be controlled with both hands or suspended with one hand.
The integrated foot rails allow you to put down the handle and calibrate the gimbal with both hands or put it down when not in use. Although the DGH is specifically designed for the Ikan DS1, MS1 + EC1, most gimbals with ¼"-20 connection from other manufacturers can also be used with the DGH.
When creating your customer opinion and/or uploading media (e.g. images, videos, audio files, texts, documents, etc.), please observe our guidelines:
Each customer opinion is editorially checked before publication. Please ensure, among other things, that
By submitting your customer opinion and/or uploading media, you agree to these guidelines and terms of use.
These terms of use apply to the participation in and use of the customer ratings of Hifi Foto Koch GmbH. In the event of conflicts with the general terms and conditions or data protection regulations, these terms of use shall take precedence.
By submitting a customer rating and/or an upload of media (e.g. pictures, videos, audio files, texts, documents etc.) you assure that
You provide your content free of charge and are not entitled to any form of remuneration or compensation. There is no entitlement to publication.
Submitted customer opinions and uploaded media are usually reviewed and published within a few working days. All transferable rights of use of the content provided by you are transferred to Hifi Foto Koch GmbH and its current or future partners and representatives (including but not limited to affiliated companies, service providers, search engines, employees, agencies, branches, joint ventures, suppliers). The content may be used, modified and published by the aforementioned parties at their own discretion without any restrictions in terms of time, content and location. Promotional use is also permitted. The content may be edited or deleted if it violates the guidelines for ratings and community media as well as these terms of use or if it makes sense for the respective purpose. It is also possible to shorten the content at any time and without giving reasons.
Hifi Foto Koch GmbH and its current or future partners and agents do not warrant the ability to modify or delete the content you submit, should you wish to do so.
You transfer the rights and licence of your content to Hifi Foto Koch GmbH and its current or future partners and representatives. You grant Hifi Foto Koch GmbH and its current or future partners and representatives, the unrestricted right to your customer opinion (rating text, nickname, star rating, recommendation, etc.) as well as to your media (e.g. images, videos, audio files, texts, documents, etc.; incl. the indication of the author, description, etc.) to use, change, store, delete, shorten, modify, adapt, translate, copy, pass on, sell and distribute worldwide in any form, any medium, in any technology. Personal data (e-mail address, address, contact details) will not be passed on to third parties.
You assume full responsibility for your content. You agree to indemnify Hifi Foto Koch GmbH and its current or future affiliates and agents for all costs, including attorneys' fees, any damages, consequential damages of any kind, claims and demands arising from your failure to comply with the Review and Community Media Guidelines and these Terms of Use.
By submitting your customer opinion and/or uploading media, you agree to the Review and Community Media Guidelines and Terms of Use. By providing your email address, you agree that Hifi Foto Koch GmbH and its current or future partners and agents may send you status information of your customer opinion by email.
Data protection notice
When using the homepage including the submission of ratings and the upload of media, so-called personal data is processed by HiFi Foto Koch GmbH in the sense of Article 6 paragraph 1 DSGVO. Personal data is information that can be directly or indirectly assigned to you or can be assigned to you. In addition to the information entered by you, such as the name, e-mail and description, this data can also be data related to your customer account, IP addresses, access times, accessed URL, sources, browsers used, operating systems and devices, the name of your access provider as well as others. A full overview of data processing and privacy information can be found at https://www.fotokoch.fi/privacy.html.