Rigs & Support for cameras
- SmallRig 3011 pole clamp (with NATO rail)
- Rod clamp and NATO rail slot
- Compatible with standard 15mm rod
- Mounts to the side or top of the cage
- Safety pins
- Standard 1/4 inch threaded holes
SmallRig 3011 Rod clamp ( with Nato rail )
- Ergonomic handle for DJI RoninS gimbal.
- Optional as side handle, allows 180° handle adjustment via the rosette.
- 3/8 inch-16, 1/4 inch-20 and Arri 3/8 inch holes for accessories.
- With a ColdShoe on the top for microphone or monitor attachment.
- The wooden handle can be used separately as a rosette handle (female).
SmallRig 2314 Handgrip for DJI RoninS
- SmallRig Camera Cage 2999
- form-fitting full cage
- firmly attached to the camera with a 1/4 inch 20 screw and a M2.5 screw
- 1/4 inch 20 and 3/8 inch 16 threads and ARRI mounts
- integrated NATO rail and cold shoe mount
- built-in screwdriver on the bottom side
- suitable for Sony Alpha 7S III A7S III A7S3
SmallRig Cage for Sony Alpha 7S III Camera
- for Samsung T5 SSD 2245
SmallRig Mount for Samsung T5 SSD 2245
Free live consultation
Your individual consultation - from the comfort of your sofa
- SmallRig Master Kit
- suitable for Sony Alpha 7S III Camera 3009
- form-fitting full cage
- HDMI cable clamp
- NATO rail and quick release handle on top
- numerous mounting options
SmallRig Master Kit for Sony Alpha 7S III A7S III A7S3 3009
- SmallRig 3738 Cage Kit
- suitable for the Nikon Z 9 camera
- Dimensions: 160 x 164 x 135 mm
- Weight: 409 g ± 5 g
- Material: Aluminum alloy, stainless steel
SmallRig 3738 Cage Kit for Nikon Z9
- SmallRig Battery Holder 1547
- enables the mounting of a battery holder
- is mounted on standard 15mm rods
SmallRig Battery back
- It consists of double ball heads with 1/4'' screws and ball head clamp
- The monitor can be adjusted in different positions and angles by the ball head and ball head clamp
- A single wing nut is used to clamp the double ball head directly in place
- Thumb screws on both ends are used to manually lock the accessory, and a protected hex key is provided for easy locking
- Maximum load is 1.5kg
- Ball head with Arri locating pin can connect the camera cage or monitor cage to Arri points.
- Ball head with a 1/4" screw could be used to attach camera cage or monitor directly.
- The articulated arm consists of a ball head with 1/4" screw, ball head with NATO clamp and a ball head clamp
- can attach camera cages, top plates or monitors with 1/4"-20 threaded holes
- attaches monitors or other accessories with NATO rail thanks to NATO clamp
- Monitors are freely adjustable thanks to the ball head and ball head clamp
- quick mounting and dismounting
- Payload: carries accessories up to 1.5 kg
- Atomos Universal Accessory Kit, accessory set with 2xNP-F Li-ION batteries + case and much more.
- the accessory set for Atomos recorders consists of:
- 1x hard case, 1x USB 3.0 docking station, 2x 5200 mAh battery (NP-F750), 1x quick charger, 1x mains adapter, 2x Master Caddy III, various neoprene covers, sunshades, cables and 1x Dispenser. Neoprene covers, sun visors, cables and 1x Disp. cleaning cloth
Atomos
- SmallRig 3195 Cage for Nikon Z9
- suitable for Nikon Z9
- Cage for various Accessory mounting options
- Secured by 1/4 inch screw
- Fixing pin and hole for shoulder strap
- integrated Arca-Swiss plate
- protective rubber pads all around
- Material: aluminum alloy, stainless steel
SmallRig 3195 Cage for Nikon Z9
- suitable for all hand sizes
- comfortable and supportive strap
- with U-plate with 1/4"-20 screw
- 2 year warranty
- Special shoulder kit for SONY FX6
- Ambidextrous shoulder kit, compatible with the original release handle
- Power supply solution that enables long shooting time
- Ergonomically shaped silicone shoulder pad for a comfortable shooting experience
SmallRig Sony FX6 Shoulder Kit
- SSD holder 2245B
- suitable for selected SmallRig cages 2203, CVB2254, CVB2255 and CVZ2264
- is attached to the cage with M4 screws
- secures T5 SSD and USB type C cables
- offset position allows for more accessories
SmallRig Bracket for Samsung T5
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Am Außenlager. Lieferzeit 4-6 Werktage nach Zahlungseingang
Der Artikel ist vor Ort in unserem Hauslager nicht vorrätig und wird nach erteiltem Kundenauftrag am Außenlager/beim Hersteller bzw. Distributor bestellt. Die zu erwartende Lieferzeit beträgt 4-6 Werktage.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
This item is ordered exclusively for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Currently not available
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.