SmallRig
About the brand: SmallRig
SmallRig is one of the leading manufacturers of accessories in the video field. They offer accessories for many different applications and products. One of their main products are camera cages, which add a Cinema Cage to cameras of many different brands, providing more bolt-on points. The SmallRig company was founded in 2009 and they start where the user's needs begin. This led SmallRig to start the co-design program in 2014, which built a close collaboration between Smallrig and the end user.
SmallRig produces camera cages / camera rigs for the following brands:
- Sony
- Panasonic
- Canon
- Nikon
- Fujifilm
- Blackmagic
- RED
- GoPro
- DJI
- Sigma
What products are available from SmallRig?
Below we would like to introduce you to some of Smallrig's products, which distinguish the brand and show its innovations:
- Handles / Wooden Handles
- Top Handles
- Camera Cage / Camera Rig
- Gimbal accessories, like handgrips or loading plates
- Video Lamps
- Softboxes
- Magic Arms
- Cable adapters for HDMI and Co.
- Cable clamp
The big advantage of camera rigs
If you have an Imbus with you, you can securely attach almost anything to your camera cage. With this philosophy you can overcome many hurdles with SmallRig, the whole thing is a bit like working with clamp bricks. Especially since SmallRig also has many special products like attachments for NATO Rails / clamps. Another advantage of SmallRig products is the quality of workmanship, virtually everything is made of metal and therefore also very robust.
- Cage for BMPCC 4K
- multiple mounting interfaces (NATO rails, 1/4" - 20 and 3/8" - 16 threaded holes, Arri mounting holes and cold shoe) for accessories
- Form-fitting design with unrestricted access to battery and SD card
- Secure mount with 1/4" - 20 screws top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting
- Compatible with SmallRig mount for Samsung T5 SSD, HDMI and SSD cable clamp and Metabones adapter support
- 1.Built-in cold shoe for attaching microphone and other lightweight accessories
- Compatible with wooden handle 1970
- Front 1/4"- 20 threaded hole to attach 15 mm Micro Rod with 1/4" thread 915
- Attaches HDMI cable clamp 1822 to protect HDMI connector
- Easy access to SD card slot, battery compartment with special design
- Two lower 1/4" threads in vertical direction to securely attach tripod plate
- New knurled screw V2 with 1/4 inch-20 standard thread
- Made from aluminum alloy
- Also a 1/4 inch thread on the underside.
- 2x 1/4" double end studs
- works with any accessories with 1/4" -20 thread
Free live consultation
Your individual consultation - from the comfort of your sofa
Arrange appointment- Fastening screw
- Standard thread 1/4"-20
- suitable for cameras
- made of stainless steel and zinc alloy
- SmallRig Single 18mm Rail Clamp 1549
- 15 mm rail clamp
- super light 15mm rod clamp v3
- 1/4"-20 standard thread
- compatible with RED Camera, Red Rig and other 15mm DSLR Camera Rig, 15mm Cage
- Included in delivery: 1x 15mm Rod Clamp-3, 2x 1/4" screws (short), 2x 1/4" screws (long), 1x hex wrench
- SmallRig 15mm rod clamp 1995
- equipped with two countersunk holes and one 1/4 inch threaded hole
- 1/4 inch threaded hole could be used for DIY choice
- 15mm rod mount
- It consists of double ball heads with 1/4'' screws and ball head clamp
- The monitor can be adjusted in different positions and angles by the ball head and ball head clamp
- A single wing nut is used to clamp the double ball head directly in place
- Thumb screws on both ends are used to manually lock the accessory, and a protected hex key is provided for easy locking
- Maximum load is 1.5kg
- 7 cm standard quick release NATO rail
- Universal shoulder plate with 15mm RailBlock from SmallRig
- Provides a comfortable run-and-gun shooting experience for the camera operator and can minimize the noise generated in the process, if any.
- Can be operated with SmallRig products for DIY options to meet personalized needs with minimal weight and reasonable price.
- Flexible and compatible with large and small cameras.
- Features light weight and weighs only 302g.
- SmallRig Cheese Bar
- equipped with industry standard 1/4"-20 and 3/8"-16 threads
- allows accessories to be mounted
- Comes with one female V-Dock and one male V-Lock
- Works with SmallRig 25mm pole clamp for DJI Ronin M/M* 1860
- Used on the back of the Blackmagic Ursa Mini or on the top of pole clamps.
- The integrated, protruding parts prevent twisting when the V-mount battery is attached
- The V-Lock can replace the original V-Lock of the V-Mount battery
- Quick and secure locking
- Low-profile base plate with two 1/4 inch and one 3/8 inch threaded hole
- Plate with 1/4'' - 20 and 3/8"-16 threads
- can be mounted on SmallRig Rod Clamp, dovetails and short rods
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Delivery time (from-to) working days after receipt of payment
The item is not in stock in our inhouse warehouse and will be ordered from the external warehouse/manufacturer or disributor after you have placed an order. The expected delivery time is listed with the item.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
We are happy to order for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Goods have been ordered. Long delivery time expected. Pre-order now and secure your place on the waiting list.
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.